Jump to the main content
GigaGone
Search

Search GigaGone

HDD vs SSD for Backups: What the Failure Data Says

By Published Topic: Drives & NAS

For a home backup drive, a hard disk (HDD) is usually the better value per gigabyte, while an SSD is quieter, faster and has no moving parts. Neither is a safe single copy. Backblaze's public Drive Stats show both types fail, and the data does not prove one is clearly more durable for a drive that sits unplugged.

Opened hard drive on a mat beside a slim black SSD on a butcher-block desk, with a four-bay NAS and a lamp behind

Part of the guide: External Drives, SSDs and NAS: A Beginner's Guide

If you are choosing a drive for backups, start with the bigger picture in our guide to external drives, SSDs and NAS, then use this page to decide between a spinning hard disk (HDD) and a flash SSD. Short answer: both work, neither is a safe single copy, and the public failure data is more useful for understanding risk than for crowning a winner.

Before you copy, wipe or reformat anything, back up first. A new drive does not replace the three-copy 3-2-1 method.

What does the failure data actually say?

Backblaze, a cloud backup company, publishes its drive data openly. It takes a daily snapshot of every operational drive in its data centers and posts the raw files and quarterly reports. Its Drive Stats page lists, for its Q2 2026 snapshot, an annualized failure rate (AFR) of 1.73% for the quarter, 1.36% for 2025 and 1.41% over the lifetime of the dataset. Those figures are for hard drives, and they average many models of different ages.

For SSDs, Backblaze has published separate reviews of the SSDs it uses as boot drives. In its 2021 review it reported only a couple of failures in the quarter among more than a thousand SSDs, against a much higher AFR for its HDD boot drives. In 2022 it said overall boot-SSD failure was low. It also cautioned that per-model numbers on small samples are noisy and that SSD failure rates will eventually rise as drives age.

Read that carefully. It suggests SSDs did well in that role, not that an SSD in your drawer will outlast a hard drive.

Why home backup is a different job

Backblaze’s drives are powered on all day in a climate-controlled room, either serving data or booting servers. A home backup drive is plugged in for hours, carried around, dropped, left in a bag or stored unpowered. The data cannot capture those risks.

That is why this page does not quote a lifespan in years. No published figure applies to your desk, so the safe approach is to plan for failure: keep a second copy, and test a restore rather than assuming the backup works.

HDD vs SSD for backups: comparison

The table above summarises the practical differences. In short:

  • HDD. Better capacity for the money, so it suits a full-disk Time Machine or Windows backup. It is more sensitive to shock while spinning. Move it only when it is idle and unplugged.
  • SSD. No moving parts, quiet and fast, so it suits a portable backup of a laptop or a quick restore. Flash cells wear and can fail with little warning, and data retention without power is limited by design. See the maker’s spec sheet.

Prices change often and differ by region, so this page does not quote any. Check current pricing at the vendor before you buy, and size the drive with our backup storage estimator. A common rule is to buy a backup drive at least as large as the data you are backing up, with room for versions; the external drive guide covers sizing.

Which should you choose?

  1. Large home library, desktop or NAS target: an HDD.
  2. Laptop travel backup, or you want fast restores: an SSD.
  3. Everything else: either one, plus a second copy in a different place.

Ransomware is a reason for the second copy: it can encrypt a backup drive that stays connected, and CISA recommends keeping offline, encrypted, tested backups. See ransomware and backups.

Warning signs to act on

Back up first, then replace the drive if you see repeated read errors, a drive that disappears from the computer, clicking or grinding noises, or S.M.A.R.T. health warnings. Do not keep running a failing drive to finish one more copy. If the files exist only on that drive, read our file-recovery primer.

Sources and date

Failure-rate figures come from Backblaze’s public pages as of 2026-11-14. Check the Drive Stats page for newer quarters.

HDD vs SSD as a backup drive (general characteristics, checked 2026-11-14; no prices quoted, check current pricing at retailers and vendor sites)
FeatureHDD (spinning disk)SSD (flash)
Cost per GBGenerally lower, especially at multi-TB sizesGenerally higher
SpeedSlower; fine for scheduled backupsFaster; shorter first backup and restore
Moving partsYes: sensitive to drops and knocks while runningNone: tolerates movement
Typical failure signClicking, slow reads, S.M.A.R.T. warningsCan fail suddenly, sometimes with little warning
Left unplugged for long periodsFine in general; check it periodicallyVendors specify data retention without power; check the maker's spec sheet
Best home useLarge Time Machine or File History target; archive copyPortable travel backup; fast restore of a laptop

Pick an HDD for a big, cheap, mostly-stationary backup disk; pick an SSD for a portable or fast-restore copy. Either way, keep a second copy elsewhere.

Questions readers ask

Do SSDs fail less often than hard drives?

Not reliably enough to say for a home backup drive. Backblaze's SSD boot-drive reports showed low failure rates, but those drives are a small sample with a different workload than a backup disk. Treat any single drive of either type as something that can fail, and keep a second copy of important files.

How long does a hard drive last?

There is no fixed lifespan. Backblaze publishes failure rates for drive models in its data centers, and they vary by model and age. For home use, plan to replace a backup drive on a schedule you choose, and replace it right away if it shows S.M.A.R.T. warnings, clicking noises or read errors.

Can an SSD lose data if left unplugged?

Flash memory is rated to hold data for a limited time without power, and the period depends on the drive, its wear and temperature. Do not use a powered-off SSD as your only long-term archive. Check the maker's spec sheet, plug it in and verify the files now and then.

Is a Backblaze failure rate what I should expect at home?

Treat it as a comparison tool, not a forecast. Backblaze runs drives powered on continuously in a controlled data center, with its own mix of models. Your home drive has a different workload, so the published annualized failure rate shows relative patterns, not your personal odds.

Which should I buy for Time Machine or Windows backup?

A hard drive is usually the practical choice for a large, always-available backup target because capacity per dollar is better. Choose an SSD if you want a quiet, portable drive that restores quickly. Check the vendor's current pricing and the capacity you need, and see our storage estimator before buying.

Do I still need a second backup if I buy a good drive?

Yes. A single drive of any kind can fail, be stolen, or be damaged by fire or water, and ransomware can encrypt a connected drive. The 3-2-1 rule keeps three copies on two media types with one off-site, so one failure does not mean lost data.

Further reading

  1. Backblaze Drive Stats: hard drive test data and methodology (backblaze.com)
  2. Backblaze: The SSD Edition, 2021 Drive Stats Review (backblaze.com)
  3. Backblaze: The SSD Edition, 2022 Drive Stats Review (backblaze.com)
  4. CISA #StopRansomware Guide (cisa.gov)

Worth reading next

Back to top