exFAT, NTFS and APFS: Formatting an External Drive for Windows, Mac and Linux
By GigaGone Editorial Team Published Topic: Drives & NAS
Format an external drive as exFAT if you need to use it on both Windows and Mac. exFAT has no practical 4 GB file limit and both systems read and write it. Choose NTFS for Windows-only drives and APFS for Mac-only drives. Formatting erases everything on the drive, so back up first.
Part of the guide: External Drives, SSDs and NAS: A Beginner's Guide
If an external drive has to move between computers, the file system decides whether it works. This page belongs to the external drives, SSDs and NAS guide and gives the choice in plain terms.
The short answer by use case
- Windows and Mac: exFAT.
- Windows only: NTFS.
- Mac only: APFS.
- Old TV, camera or console that wants FAT32: FAT32, but mind the 4 GiB file limit.
Microsoft lists a FAT32 maximum file size of 4 GiB and 2^64-1 bytes for NTFS and exFAT. Apple tells Mac users formatting a disk for Windows to choose MS-DOS (FAT) for 32 GB or smaller and ExFAT for larger.
Back up first, then format
Formatting erases everything on the drive. Copy your files somewhere else, open a few to confirm the copy is good, and only then erase. Our backup guide and three-copy backup method explain how to keep a second copy.
How the formats compare
See the table above. In short:
- exFAT is simple and portable. It has no journaling, so unplugging it without ejecting is more likely to corrupt it. Always eject.
- NTFS adds permissions, journaling and compression and is the Windows default. Macs usually read it but do not write to it without extra software.
- APFS is Apple’s default on macOS 10.13 and later, tuned for flash storage, with snapshots and encryption options. Windows does not read it without third-party software.
- FAT32 works nearly everywhere but caps files at 4 GiB.
Format a drive for Windows and Mac on a Mac
Checked on 2026-11-14 against Apple’s Disk Utility guide. Back up the drive first.
- Open Disk Utility.
- Choose View > Show All Devices.
- Select the disk (the device, not just the volume) in the sidebar.
- Click Erase in the toolbar.
- Choose a partition scheme from the Scheme menu.
- In the Format menu choose ExFAT (disk larger than 32 GB) or MS-DOS (FAT) (32 GB or smaller).
- Enter a name of up to 11 characters.
- Click Erase, then Done.
Format a drive on Windows
Checked on 2026-11-14. Back up the drive first, then open File Explorer, right-click the drive, choose Format, pick exFAT or NTFS from the File system list and click Start. The exact wording can vary between Windows versions.
Linux
Current Linux distributions can generally read and write exFAT and NTFS, and Linux has its own native formats, which we do not cover here. For a drive that moves between Linux and other systems, exFAT is the common choice. Check your distribution’s documentation.
Drive not showing on Mac or PC
Try another cable or port, avoid unpowered hubs and check Disk Utility (Mac) or Disk Management (Windows). If the drive appears but cannot be written to, the format is probably the cause. Copy your files off first, and if the drive makes noises or has errors, see drive failure warning signs before attempting anything else. Capacity looking smaller than the label? That is GB vs GiB.
| Feature | exFAT | NTFS | APFS | FAT32 |
|---|---|---|---|---|
| Windows | Read and write | Read and write | Not supported by default | Read and write |
| Mac (macOS) | Read and write | Typically read only unless extra software is installed | Read and write (native) | Read and write |
| Max file size | 2^64-1 bytes | 2^64-1 bytes | See Apple's APFS documentation | 4 GiB |
| Journaling | No | Yes (metadata) | Snapshots (per Apple) | No |
| Best for | Drives shared by Windows and Mac | Windows-only drives | Mac-only drives, SSDs | Small or legacy devices |
Use exFAT to move a drive between Windows and Mac, NTFS for a Windows-only drive and APFS for a Mac-only drive.
Questions readers ask
Which format works on both Windows and Mac?
exFAT. Apple lists ExFAT among the Windows-compatible formats in Disk Utility and recommends it for disks over 32 GB, and Windows supports it natively. It has no practical file-size limit, so large video files are fine. Linux can use it too, on current kernels, but check your distribution.
Why does my external drive not show up on my Mac?
Common causes are a Windows-only format such as NTFS (which a Mac reads but may not write), a loose cable or hub, or a drive that needs more power. Check Finder settings to show external disks, and look in Disk Utility with View > Show All Devices. Do not erase the drive until you have copied your files off elsewhere.
Can a Mac write to an NTFS drive?
Not by default. macOS can usually read NTFS drives but not write to them without extra software. If the drive must be used on both systems, copy the files off, back them up, then reformat to exFAT. Do not reformat a drive that holds your only copy of the files.
What is the biggest file I can store on FAT32?
FAT32 limits files to 4 GiB, according to Microsoft. A single 4K video or disk image can exceed that. exFAT and NTFS raise the limit to 2^64-1 bytes, which no consumer file will reach. If you need to store large videos or disk images, pick one of those instead.
Should I use APFS for a Time Machine drive?
For a Mac-only backup drive, yes, APFS is Apple's default format on modern macOS. Time Machine normally prepares the drive for you when you choose it, and it will offer to erase it if needed. Back up any existing files on that drive first. See our Time Machine guide.
Does formatting a drive erase everything?
Yes. Apple's Disk Utility states that formatting a disk or volume erases all the files on it. Copy your files to another location first, and confirm the copy opens correctly before you click Erase. A quick format makes data hard to see, but plan on it being gone.
Further reading
- Microsoft Learn: File system functionality comparison (NTFS, exFAT, UDF, FAT32) (learn.microsoft.com)
- Apple Support: File system formats available in Disk Utility on Mac (support.apple.com)
- Apple Support: Format a disk for Windows computers using Disk Utility on Mac (support.apple.com)
Worth reading next
- External Drives, SSDs and NAS: A Beginner's Guide
Learn the difference between external hard drives, portable SSDs, and home NAS boxes, with failure-rate context and advice on choosing backup hardware.
- Backblaze Drive Stats Explained for Home Users
How to read Backblaze's public Drive Stats: drive days, annualized failure rate, confidence and sample size, and what it means for a home backup drive.
- Drive Failure Warning Signs and What to Do Next
Clicking, freezing, vanishing files or a SMART warning can mean a drive is failing. Learn the signs, what to do first and when to call a professional.
- How to Choose an External Drive for Backups
Pick an external drive for backups: capacity rule of thumb, HDD vs SSD, format, encryption and the habits that matter more than the model.
- HDD vs SSD for Backups: What the Failure Data Says
Should a backup drive be a hard disk or an SSD? What Backblaze's published failure data does and does not show, and a simple pick for home backups.
- NAS vs External Drive for Home Backup
NAS or external hard drive for home backup? Compare cost, setup, access, and why RAID is not a backup, with a pick for each kind of household.