Jump to the main content
GigaGone
Search

Search GigaGone

GB vs GiB Converter: Where Did My Drive Space Go?

By Published Topic: Storage Units & Capacity

Convert any drive label or file size between decimal SI units (MB, GB, TB) and binary IEC units (MiB, GiB, TiB) to see why Windows reports less space than the box. A 1 TB drive holds 1,000,000,000,000 bytes, which equals 931.32 GiB; this tool runs in your browser and GigaGone never receives files.

External drive beside a wooden ruler, a calculator and an open notebook on a desk, with a NAS and phone on a shelf

Convert drive sizes

Runs in your browser. Only a number and a unit are used; nothing is sent or stored.

Size to convert
Common drive sizes

Enter a size and choose Convert, or pick a common drive size.

Part of the guide: Storage Units Explained: Bytes, GB, GiB and Why Drives Show Less

Use this converter to translate any drive label or file size between decimal units (MB, GB, TB) used by drive manufacturers and binary units (MiB, GiB, TiB) used by Windows and memory tools.

Privacy note: This tool runs in your browser; nothing you type leaves the page; GigaGone never receives files. It accepts numbers and unit choices only.

Formulas Used by the Converter

Following the NIST definitions of SI and binary prefixes, every calculation converts the input into exact bytes first, then divides into both decimal and binary units:

  • Decimal (SI): 1 KB = 10^3 B, 1 MB = 10^6 B, 1 GB = 10^9 B, 1 TB = 10^12 B
  • Binary (IEC): 1 KiB = 2^10 B (1,024), 1 MiB = 2^20 B (1,048,576), 1 GiB = 2^30 B (1,073,741,824), 1 TiB = 2^40 B (1,099,511,627,776)
  • Conversions: GiB = bytes / 2^30 and GB = bytes / 10^9
  • Label gap: Difference = labeled GB - GiB

Worked Examples (Common Drive Sizes)

Drive Label (Decimal) Exact Bytes Binary GiB (Windows “GB”) Binary TiB (Windows “TB”) Difference vs. Label
128 GB 128,000,000,000 119.21 GiB 0.12 TiB -8.79
256 GB 256,000,000,000 238.42 GiB 0.23 TiB -17.58
512 GB 512,000,000,000 476.84 GiB 0.47 TiB -35.16
1 TB (1,000 GB) 1,000,000,000,000 931.32 GiB 0.91 TiB -68.68
2 TB (2,000 GB) 2,000,000,000,000 1,862.65 GiB 1.82 TiB -137.35
4 TB (4,000 GB) 4,000,000,000,000 3,725.29 GiB 3.64 TiB -274.71

For example, a 1 TB drive contains 1,000,000,000,000 bytes. Dividing 10^12 by 1,073,741,824 (2^30) gives 931.32 GiB, which Windows displays as 931 GB.

Assumptions and OS Conventions

  • Windows: Reports binary values (2^30, 2^40) while displaying GB and TB labels.
  • macOS and iOS: Modern Apple operating systems report storage capacity using decimal units (10^9, 10^12), matching the drive box.
  • Formatting overhead is separate: File system metadata (NTFS, APFS, exFAT) and hidden recovery partitions use additional space that varies by drive and format, so this tool does not estimate formatting overhead as a fixed number.

Next Steps

Sources

  1. NIST: Prefixes for Binary Multiples
  2. Western Digital Support: Available Capacity of the Drive is Smaller than the Drive Label
  3. Apple Support: How storage capacity is measured on Apple devices

Questions readers ask

Why does my 1 TB drive show 931 GB in Windows?

Hard drive and SSD makers measure 1 TB in decimal as 1,000,000,000,000 bytes. Windows divides that byte count by binary 2^30 (1,073,741,824) and displays 931 GB (technically 931.32 GiB), so all of your drive's bytes are still there. Formatting also reserves a small amount of space for the file system, so free space can look slightly lower still.

Does this converter upload my files or save what I type?

No, this converter runs entirely inside your web browser and accepts only numbers and unit selections—never a file or a file name. Nothing you type leaves the page over the network, and GigaGone never receives, stores, or shares any user data.

Why is formatted free space slightly lower than the GiB conversion?

Converting decimal GB to binary GiB explains the unit-math gap, while formatting a drive with a file system such as NTFS, exFAT, or APFS reserves a small separate amount of space for file allocation tables, metadata, and hidden recovery partitions.

How many GiB is a 2 TB or 4 TB external drive?

A 2 TB decimal drive (2 x 10^12 bytes) equals 1,862.65 GiB (about 1.82 TiB), and a 4 TB decimal drive (4 x 10^12 bytes) equals 3,725.29 GiB (about 3.64 TiB) before file system formatting overhead. Use the converter above for any other capacity, since drive labels are decimal while many operating systems report binary units.

Does Mac show the same numbers as Windows for an external drive?

No, modern macOS and iOS report storage capacity using decimal units where 1 GB equals 1,000,000,000 bytes, matching the manufacturer's box. A 1 TB drive therefore displays close to 1 TB on a Mac, minus a small amount used by file system formatting.

Further reading

  1. NIST: Prefixes for Binary Multiples (physics.nist.gov)
  2. Western Digital Support: Available Capacity of the Drive is Smaller than the Drive Label (support-en.westerndigital.com)
  3. Apple Support: How storage capacity is measured on Apple devices (support.apple.com)

Worth reading next

Back to top