GB vs GiB: Why 1 TB Shows as 931 GiB
By GigaGone Editorial Team Published Topic: Storage Units & Capacity
A gigabyte (GB) is 1,000,000,000 bytes, while a gibibyte (GiB) is 1,073,741,824 bytes, about 7.4 percent larger. Drive makers label capacity in decimal GB and TB; some software counts in binary and may still call it GB. That mismatch is why one drive can appear with two different sizes, and nothing is missing.
Part of the guide: Storage Units Explained: Bytes, GB, GiB and Why Drives Show Less
GB and GiB both count bytes, but with different multipliers, and mixing them up is behind most “my drive is smaller than the box says” complaints. This page is part of our storage units explained hub and answers the question in one place. Any unfamiliar term is defined in the storage and backup glossary.
The two definitions
- GB (gigabyte, decimal): 10^9 bytes, which is 1,000,000,000 bytes.
- GiB (gibibyte, binary): 2^30 bytes, which is 1,073,741,824 bytes.
NIST lists both values, and notes the binary prefixes (kibi, mebi, gibi, tebi) were approved in the IEC standard in December 1998 and are not part of the SI. Decimal prefixes are SI; the binary ones were created so that 1,024-based quantities could have their own names.
Why two systems exist
Early computing used powers of two, so “kilo” came to mean 1,024 in memory and files. Storage makers kept the everyday meaning of 1,000. NIST says most manufacturers use megabyte to mean 2^20 in some computing contexts, while storage-device makers usually mean 1,000,000 bytes, and calls the confusion real. Seagate states the industry standard is to display capacity in decimal.
The prefix table
| Decimal (SI) | Bytes | Binary (IEC) | Bytes |
|---|---|---|---|
| 1 KB | 1,000 | 1 KiB | 1,024 |
| 1 MB | 1,000,000 | 1 MiB | 1,048,576 |
| 1 GB | 1,000,000,000 | 1 GiB | 1,073,741,824 |
| 1 TB | 1,000,000,000,000 | 1 TiB | 1,099,511,627,776 |
The TiB figure is 2^40, calculated from the NIST definition. The gap widens each step: about 2.4 percent at kilo, 4.9 at mega, 7.4 at giga and 10 at tera.
Worked example: 1 TB
- A 1 TB drive holds 1,000,000,000,000 bytes.
- Divide by 1,073,741,824 to get GiB: 931.32.
- Windows reports about 931, and still writes “GB”, because it counts in binary but keeps the decimal label.
Seagate’s table agrees: 500 GB shows about 465, 1 TB about 931 and 4 TB about 3.63 TB in Windows. The same maths gives 256 GB as about 238.4 GiB. Try your own numbers in the GB vs GiB converter.
Which system does your device show?
Seagate says Windows, FDISK, system BIOS and older macOS use binary, and newer macOS shows decimal that matches the label. Apple’s capacity page says manufacturers use decimal and that capacity formatted is less than the label. Checked on 2026-11-14; conventions differ by version, so look at your own system.
Does it matter?
Mostly it explains small, predictable gaps. If your drive shows far less than the units explain, formatting and system files are involved; read why a drive shows less space. To size a backup drive, use the backup storage estimator and allow for the difference.
FAQ
What is the difference between GB and GiB?
A GB is a decimal unit of 1,000,000,000 bytes. A GiB is a binary unit of 1,073,741,824 bytes (2 to the power 30). So one GiB is about 7.4 percent bigger than one GB. The i in GiB marks the binary version, a naming standard NIST describes as approved by the IEC in 1998.
Why does 1 TB show as 931 GB?
A 1 TB drive holds 1,000,000,000,000 bytes. Divide by 1,073,741,824 and you get about 931.3, which Windows displays as 931 GB because it counts in binary but keeps the GB label. Seagate documents this in its capacity guidance. The drive is not defective and no space is missing.
Is a gibibyte a real unit?
Yes. The IEC approved the binary prefixes kibi, mebi, gibi and tebi in December 1998, and NIST publishes them. They are not part of the SI, but they exist so that binary quantities can be named without reusing decimal words, which is the root of the confusion.
Which is bigger, GB or GiB?
The GiB is bigger. One GiB is 1,073,741,824 bytes against 1,000,000,000 for a GB. The gap grows with size: a TiB is about 10 percent larger than a TB. That is why the displayed number is smaller when software divides the same byte count by the larger unit.
Do Macs use GB or GiB?
Seagate says newer macOS versions display decimal values that match the drive label, while Windows and older macOS use binary. Apple’s own capacity page says manufacturers use decimal, and that some older systems report in binary. Check the version you are on, since conventions have changed over time.
Does the difference affect my cloud or phone storage?
It can, because any app or system may count in either base, so check which unit a quota or screen uses. A phone or computer also reserves some storage for its operating system. Apple notes formatted capacity is less than the stated amount. If a drive still shows less than expected after allowing for units, see our page on why a drive shows less space than its label.
Sources
- NIST: Prefixes for binary multiples
- Seagate Support: Why does my hard drive report less capacity than the label?
- Seagate Support: Storage capacity measurement standards
- Apple Support: How storage capacity is reported
Related
| Decimal unit | Bytes | Binary unit | Bytes |
|---|---|---|---|
| 1 KB | 1,000 | 1 KiB | 1,024 |
| 1 MB | 1,000,000 | 1 MiB | 1,048,576 |
| 1 GB | 1,000,000,000 | 1 GiB | 1,073,741,824 |
| 1 TB | 1,000,000,000,000 | 1 TiB | 1,099,511,627,776 |
Drive makers use the decimal column and Windows counts in the binary column, which is why a 1 TB drive shows as about 931 in Windows.
Questions readers ask
What is the difference between GB and GiB?
A GB is a decimal unit of 1,000,000,000 bytes. A GiB is a binary unit of 1,073,741,824 bytes (2 to the power 30). So one GiB is about 7.4 percent bigger than one GB. The i in GiB marks the binary version, a naming standard NIST describes as approved by the IEC in 1998.
Why does 1 TB show as 931 GB?
A 1 TB drive holds 1,000,000,000,000 bytes. Divide by 1,073,741,824 and you get about 931.3, which Windows displays as 931 GB because it counts in binary but keeps the GB label. Seagate documents this in its capacity guidance. The drive is not defective and no space is missing.
Is a gibibyte a real unit?
Yes. The IEC approved the binary prefixes kibi, mebi, gibi and tebi in December 1998, and NIST publishes them. They are not part of the SI, but they exist so that binary quantities can be named without reusing decimal words, which is the root of the confusion.
Which is bigger, GB or GiB?
The GiB is bigger. One GiB is 1,073,741,824 bytes against 1,000,000,000 for a GB. The gap grows with size: a TiB is about 10 percent larger than a TB. That is why the displayed number is smaller when software divides the same byte count by the larger unit.
Do Macs use GB or GiB?
Seagate says newer macOS versions display decimal values that match the drive label, while Windows and older macOS use binary. Apple's own capacity page says manufacturers use decimal, and that some older systems report in binary. Check the version you are on, since conventions have changed over time.
Does the difference affect my cloud or phone storage?
It can, because any app or system may count in either base, so check which unit a quota or screen uses. A phone or computer also reserves some storage for its operating system. Apple notes formatted capacity is less than the stated amount. If a drive still shows less than expected after allowing for units, see our page on why a drive shows less space than its label.
Further reading
- NIST: Prefixes for binary multiples (physics.nist.gov)
- Seagate Support: Why does my hard drive report less capacity than the label? (seagate.com)
- Seagate Support: Storage capacity measurement standards (seagate.com)
- Apple Support: How storage capacity is reported (support.apple.com)
Worth reading next
- Storage Units Explained: Bytes, GB, GiB and Why Drives Show Less
Understand bytes, MB, GB, TB, and binary GiB/TiB units, why a 1 TB drive shows around 931 GiB in Windows, and how macOS and iOS report drive capacity.
- Backup Storage Estimator: How Much Space Do You Need?
Estimate how many gigabytes you need for photo, video, and document backups over multiple years, including 3-2-1 copies and 20% headroom.
- GB vs GiB Converter: Where Did My Drive Space Go?
Convert MB, GB, and TB to binary MiB, GiB, and TiB in your browser to see why a 1 TB drive shows 931.32 GiB in Windows without missing space.
- How Much Storage Do I Need? Phone, Laptop and Backup
How to work out how much phone, laptop and backup storage you need: check what you use now, add growth and versions, and size the backup to match.
- MB, GB and TB Explained With Everyday Examples
Understand kilobytes, megabytes, gigabytes, and terabytes in plain English, with everyday file examples and why 1 TB shows as 931 GiB on Windows.
- How Big Are Photos and Videos? File Sizes by Format
Typical file sizes for HEIC, JPEG, and RAW photos plus 1080p and 4K video per minute, so you can estimate how many photos fit in 1 GB or 1 TB.